Adjusting Pump to Pump Number Setting

1. Install special tool (A) onto pump pin (B) with teeth of tool aligned with teeth of scale ring (C).

2. Loosen nut (D) and rotate scale ring with special tool until pointer (E) is pointing to the gauge (F) number selected from rate chart. Tighten nut (D) to specification.

Specification

Nut -Torque 25 N·m (18 lb-ft)


A-Special Tool
B-Pin
C-Scale Ring
D-Nut
E-Pointer

A35432

56570OMA,120M -19-13MAY96-1/2

3. Store special tool (A) on pin (B) located on pump mounting bracket. Attach tool with spring locking pin (C).


A-Special Tool
B-Pin
C-Spring Locking Pin

A35433

56570OMA,120M -19-13MAY96-2/2