Detaching from Tractor

causym CAUTION: To avoid injury from escaping hydraulic oil under pressure, relieve the pressure in the system before removing hoses from breakaway couplers.

IMPORTANT: To prevent possible tipping, install parking straps on machines with drive wheels to front of frame and no lift-assist wheels, before disconnecting machine from tractor.

1. Install parking strap before disconnecting machine from tractor when lift assist wheels are NOT installed.

A54960,Q -19-08MAY97-1/2

Attach strap (A) to upper parallel arm on outside planting units with M12 x 45 cap screw (B), bushing (C), flat washer (D) and nut (E).

Attach strap to lower parallel arm with drilled pin (F) and spring locking pin (G).

2. Lower machine to ground.

3. Disconnect all hydraulic hoses.

4. Disconnect warning light harness from seven-pin connector.

5. Disconnect monitor wiring harness.

6. Attach dust covers to harness connectors.

7. Lower parking stand and fasten with drilled pin and spring locking pin.

8. Disconnect machine from tractor.

A33135


A-Strap
B-Cap Screw
C-Bushing
D-Flat Washer
E-Nut
F-Drilled Pin
G-Locking Pin

A54960,Q -19-08MAY97-2/2