Changing Vacuum Meter Brush

1. Open vacuum meter. See ACCESSING THE VACUUM METER in this section.

2. Remove existing brush.

3. Install either the long or short brush as recommended in the Vacuum Meter Rate Charts section.

AG,OUO6074,1186 -19-04AUG00-1/2

NOTE: Brush must be installed with notch (A) on side shown for proper operation.

4. Snap brush into slot until it contacts side of meter housing (B).

A-Notch
B-Meter Housing

AG,OUO6074,1186 -19-04AUG00-2/2