|
IMPORTANT:
The actual planting rate must be checked in the field. See Checking Seed Population section.
NOTE:
All rates in the following charts are based on typical drive wheel slippage. Drive wheel slippage is affected by crop residue, unit down force, tire pressure and/or soil conditions.
1.
Select desired row spacing and seed population under proper column.
2.
Choose proper input sprocket:
A higher population will require the use of the high-range input sprocket and HIGH RANGE chart for that particular seed.
|
A lower population will require the use of the low range input sprocket and LOW RANGE chart for that particular seed.
3.
Determine correct seed drive transmission sprocket combination.
4.
Determine recommended planting speed range. The faster speed, in the speed range, is for optimum field conditions. Reduce speed and increase unit down force if planting in rough conditions.
|