Adjusting Gauge Wheels

NOTE: When assembled, gauge wheels and disk blades must be free to turn with minimal resistance.

To prevent a buildup of dirt or trash between gauge wheels and opener, position wheels correctly against disk blades.

Gauge-wheel tires should just touch blades or be no more than 1.5 mm (1/16 in.) away from blades at their closest point.

AG,OUO6074,1369 -19-04AUG00-1/2

To move gauge wheel closer to blade, place wrench (A) on inside nut and turn counterclockwise. To move gauge wheel away from blade, turn wrench (A) clockwise.


A-Wrench

A39401

AG,OUO6074,1369 -19-04AUG00-2/2