Connecting Hydraulic Hoses (30-60 Series Row-Crop Tractors)

causym CAUTION: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly. Replace damaged hoses.

NOTE: It is not necessary to turn off tractor if attaching machine to John Deere tractor with ISO couplers.

NOTE: If there are not enough SCV couplers, a power beyond kit is available. See your John Deere dealer.

LIFT ASSIST HOSES: If machine is equipped with lift assist hoses, connect lift assist hoses (A) to SCV I. Set flow control valve (C) to full open "RABBIT" position.

INDEPENDENT MARKERS: If machine is equipped with independent markers, connect marker hoses (B) to SCV II. Set flow control valve (C) to desired rate to keep control lever in detent position.

VARIABLE RATE DRIVE: If machine is equipped with variable rate drive, see your SEEDSTAR ® Seed Monitor and Variable Rate Drive Operator's Manual.

A28095
A28096


A-Hydraulic Hoses, Machine Lift
B-Marker Hoses
C-Flow Control Valve

SEEDSTAR is a trademark of Deere & Company

OUO1074,000016F -19-21MAR01-1/1