Single Lever Hydraulic Lift Control-8000 Series Row-Crop Tractors
IMPORTANT:
Tractor must be equipped with single lever control components (see your John Deere dealer for installation instructions [A56684-G6]).
Hoses may become pinched or cut when raising or lowering machine. Move all hoses clear of any pinch points.
John Deere tractors have an electronic hitch control and must be turned off when using single lever control (see your John Deere dealer).
Machine must be leveled before adjusting single lever control attachment.
NOTE:
This system allows the hitch to be operated by oil flow from an SCV, which also operates the lift-assist wheels.
The markers can be hooked to the lift system for automatic operation (see your John Deere dealer).
Single lever control attachment allows the machine to be lifted with one SCV lever. Lift assist cylinders are dual acting with this system, allowing lift assist wheels to be raised off the ground.
|