Adjusting Marker Length-1730 MachinesLower marker and loosen set screws securing outer marker arm. |
OUO6074,00001AD -19-25JAN01-1/3 |
|
NOTE: For 46 cm (18 in.) rows, the tractor tire must run on the mark because marker will not go in the required 3660 mm (144 in.) mark. NOTE: Dimension (A) is measured from seed disk openers on outer planting unit to marker disk blade. Set marker disk to dimension (A) from the chart below. Tighten set screws. This is an approximate dimension and should be checked in the field.
|
|
OUO6074,00001AD -19-25JAN01-2/3 |
| 1730 Machines-Marker Length | ||
|---|---|---|
| Number of Rows | Row Spacing | Dimension "A" |
| 6 | 56 cm (22 in.) | 1956 mm (77 in.) |
| 6 | 76 cm (30 in.) | 2667 mm (105 in.) |
| 6 | 91 cm (36 in.) | 3200 mm (126 in.) |
| 6 | 97 cm (38 in.) | 3378 mm (133 in.) |
| 6 | 102 cm (40 in.) | 3556 mm (140 in.) |
| 8 | 56 cm (22 in.) | 2515 mm (99 in.) |
| 8 | 76 cm (30 in.) | 3429 mm (135 in.) |
| 8 | 91 cm (36 in.) | 4115 mm (162 in.) |
| 8 | 97 cm (38 in.) | 4344 mm (171 in.) |
| 8 | 102 cm (40 in.) | 4572 mm (180 in.) |
| 9 | 38 cm (15 in.) | 1905 mm (75 in.) |
| 9 | 46 cm (18 in.) | 2286 mm (90 in.) |
| 9 | 48 cm (19 in.) | 2413 mm (95 in.) |
| 9 | 51 cm (20 in.) | 2540 mm (100 in.) |
| 11 | 38 cm (15 in.) | 2286 mm (90 in.) |
| 11 | 46 cm (18 in.) | 2743 mm (108 in.) |
| 11 | 48 cm (19 in.) | 2896 mm (114 in.) |
| 11 | 51 cm (20 in.) | 3048 mm (120 in.) |
| 12 | 56 cm (22 in.) | 3632 mm (143 in.) |
| 13 | 38 cm (15 in.) | 2667 mm (105 in.) |
| 13 | 46 cm (18 in.) | 3201 mm (126 in.) |
| 13 | 48 cm (19 in.) | 3378 mm (133 in.) |
| 13 | 51 cm (20 in.) | 3556 mm (140 in.) |
| 15 | 38 cm (15 in.) | 3048 mm (120 in.) |
| 15 | 46 cm (18 in.) | 3658 mm (144 in.) |
| 15 | 48 cm (19 in.) | 3861 mm (152 in.) |
| 15 | 51 cm (20 in.) | 4064 mm (160 in.) |
OUO6074,00001AD -19-25JAN01-3/3 |