Stationary Single-Shoot Clean Out Procedure

1. Turn off fan.

2. Remove bottom manifold plate at first meter beyond plug.

AG,OUO6023,1075 -19-21JUL00-1/2

causym CAUTION: To protect yourself from flying seed, fertilizer and debris, stay in the tractor cab while the fan is running.

If you must leave the cab with the fan running, wear protective clothing including face mask, gloves and goggles.

3. With bystanders away from cart, turn on fan at low rpm and increase until material upstream is completely emptied from all bottom primaries through manifold bottom opening.

4. Turn off fan.

5. Install bottom manifold plate. Repeat above steps for remaining meters.

6. Remove caps from unused air tubes at cart exit.

7. With bystanders away from cart, turn on fan at low rpm and increase rpm until material upstream is completely emptied from all unused primaries through air tubes at cart exit.

8. Install caps on unused air tubes at cart exit.

TS265

AG,OUO6023,1075 -19-21JUL00-2/2