|
[ ] Adjust display contrast and backlight.
[ ] Refresh RUN pages using RUN Page Layout.
[ ] Enter Target Seeding Speed.
[ ] Tank Meter Setup.
-
Choose and enter product.
-
Enter the minimum and maximum rates (w/Variable Rate) -OR-
-
Enter target rate (w/o Variable Rate).
-
Select roller.
-
Change and/or select and enter new Meter Displacement Value.
[ ] Calibrate Tank Meter.
-
Follow on-screen and written directions to obtain weighable product sample.
-
Enter weight of product sample.
-
Have system calculate Meter Displacement Value.
|
[ ] Variable Rate (build menu of different rate combinations).
-
Turn rate ON.
-
Enter fixed rate for each tank.
-
Enable adjustment and set increment for each tank, if desired.
[ ] Set Target Fan Speed.
[ ] Turn appropriate clutches ON.
Options Setup:
[ ] Seed Counting.
-
Enter Seed size for EACH tank.
-
Enter High Population Warning if value other than default value is desired.
-
Enter Low Population Warning if value other than default value is desired.
|