Front and rear tanks can be set to empty simultaneously when applying one product. Total application rate (kg/hectare) is split between the two tanks and meter settings adjusted for the proper ratio.

IMPORTANT: Sample chart illustrated. Do not use to calibrate machine setting.

This non-typical example is based on the same meter segment type being used in both tanks. Determine actual meter segment types on your

machine and use corresponding charts to make ratio calculations and rate setting adjustments.

NOTE: Example based on a desired application rate of 112 kg/hectare of 11-52-0 fertilizer with tanks filled to capacity.

EXAMPLE:

Front Tank-112 kg/hectare x .40 = 44.8 kg/hectare
Rear Tank-112 kg/hectare x .60 = 67.2 kg/hectare

Total Application-67.2 + 44.8 = 112 kg/hectare

AG,OUO6023,1140 -19-21JUL00-1/2

Use individual application rates to set front (A) and rear (B) metering as close as possible to total application rate. 45.9 is the closest match to the front tanks computation of 44.8 kg/hectare. 26 would be the

AG,OUO6023,1140 -19-21JUL00-2/2