Operate Safely

Do not make field adjustments while machine is in motion.

Do not enter tank unless another person is present and hydraulic hoses are disconnected from tractor.

Operate machine from the tractor seat only.

Keep hands and fingers away from hinge area when positioning auger. Lock auger in storage position before operating in the field.

Clear area around machine before raising or lowering machine or wings.

Stop tractor on level ground when raising or lowering wings.

Do not operate with wings raised.

To improve stability, travel through the field with wings unfolded. Fold wings to transport position just before leaving the field and entering a roadway.

Do not operate close to the edge of a ditch, creek, gully or steep embankment.

Avoid holes, ditches and obstructions which may cause tractor, cart or seeding tool to roll over, especially on hillsides.

Avoid sharp turns on hillsides.

Slow down when turning or traveling over rough ground, and when turning on inclines.

Shut off tractor and shift to "Park" or set brakes when leaving tractor. Remove key when leaving tractor unattended.

AG,OUO1011,65 -19-16MAR99-1/1