|
Tank Lid Indicator Gauge reads low differential tank pressure.
|
Tank lid open.
|
Close tank lid.
|
|
|
Air leak in tank or pressurization system.
|
Contact your John Deere dealer.
|
|
|
Pinched or damaged sensor lines.
|
Repair / Replace sensor lines.
|
|
|
Water or obstruction in sensor lines.
|
Remove obstruction.
|
|
|
Damaged / Broken Gauge.
|
Replace gauge.
|
|
Tank Lid Indicator Gauge reads high differential tank pressure.
|
Product build up in sensor line fitting at manifold.
|
Remove sensor line and clean fitting.
|
|
|
Pinched or damaged sensor lines.
|
Repair / Replace sensor lines.
|
|
|
Water or obstruction in sensor lines.
|
Remove obstruction.
|
|
|
Damaged / Broken Gauge.
|
Replace gauge.
|
|
|
Bottom manifold cover not secured properly.
|
Latch manifold cover into place.
|
|
|
Manifold plugs not installed on unused primary lines.
|
Install foam manifold plugs on all unused primary lines.
|
|
Tank Lid Indicator Gauge needle doesn't center properly when cart fan is disengaged.
|
Gauge misadjusted.
|
"Zero" out gauge
|
|
|
Water or obstruction in sensor lines.
|
Remove obstruction.
|