Changing Driver and Driven Gear Combinations

1. The 14-tooth gear (A) and the 28-tooth gear (B) are interchangeable, depending on the desired rate.

Remove quick-lock pins (C) and remove gears.



A-Gear, 14-Tooth
B-Gear, 28-Tooth
C-Quick-Lock Pins

A32493

OUO1074,0000025 -19-02OCT00-1/2

2.

Install desired driver gear on upper front shaft (A) and desired driven gear on lower rear shaft (B).

Secure gears with quick-lock pins.


A-Upper Front Shaft
B-Lower Rear Shaft

A33681

OUO1074,0000025 -19-02OCT00-2/2