Install Service Locks

IMPORTANT: If cast cylinder stops are used to adjust planting frame height, they must be removed before service locks can be installed.

Raise machine to transport position with tractor remote cylinder operating lever.

OUO6074,0000229 -19-21FEB01-1/2

Remove lever (B) from storage location (A) in hitch panel and install on service lock as shown.

Using lever (B), rotate service locks (C) into position over lift cylinder rod.


A-Storage Location
B-Lever
C-Service Locks

A38405
A38406
A32780

OUO6074,0000229 -19-21FEB01-2/2