Raising and Lowering Independent Markers

IMPORTANT: DO NOT put SCV lever into FLOAT when raising and lowering. The correct procedure for raising and lowering is to POWER completely UP or DOWN.

Markers can be operated independent of the machine lift system. The independent marker control requires an additional SCV on the tractor dedicated to marker control.

OUO6074,0000238 -19-02MAR01-1/2

Operate the markers independently by moving SCV lever (A) dedicated to markers. Markers will operate alternately each time lever is cycled fully to both raise and lower marker.

A marker alternating valve automatically shifts oil flow (so opposite marker can be lowered) each time lever is moved from marker-lower to marker-raise position (even when lever is moved only briefly). In this way the following additional marker functions are possible:

• One marker can be raised partially (to clear an obstacle) then lowered again by cycling lever twice, quickly (without actually moving markers), until marker function returns to same marker.
• Both markers can be lowered (as when starting in the middle of field) by lowering one marker, then quickly cycling the lever (without raising that marker) so the second marker will lower.

A-SCV II Lever

OUO6074,0000238 -19-02MAR01-2/2