Setting Selective Control Valve for VACUMETER™ (55-60 Series Row Crop Tractors)NOTE: To operate the vacuum system with a 55-60 series tractor, the vacuum system must be converted to use an in-line flow control valve to adjust vacuum levels. See your John Deere dealer. For non John Deere tractors, see dealer for motor return hook-up. Position flow control valve (A) (recommend using right-hand SCV lever [II or III]) to fast (RABBIT) setting. Vacuum level will be controlled with planter flow control valve. |
|
|
VACUMETER is a trademark of Deere & Company | AG,OUO1074,1003 -19-08MAR00-1/1 |