Row Cleaner for Unit Mounted Coulter

causym CAUTION: DO NOT use spacer strap on arm as a handle. Fingers may be seriously injured on sharp edge of coulter blade. Use a 1/2 in. drive socket tool to adjust height.

NOTE: Only available for 76 cm (30 in.) corn rows.

1. Insert the 1/2 in. drive socket tool into square hole (A) on arm.

2. Lift socket tool and remove pin (B). Insert pin (B) in hole at desired height of row cleaner attachment.

A38394


A-Square Hole
B-Pin

AG,OUO6074,1290 -19-04AUG00-1/2

3. If row cleaner is NOT needed, raise row cleaner up and locate pin (A) to highest position.


A-Pin

A38395

AG,OUO6074,1290 -19-04AUG00-2/2