Connecting VACUMETER™ Using Planter Flow Control Valves to Control Dual Motors (60-70 Series) Four-Wheel Drive Tractors

A-Planter Flow Control Valve Assembly

B-Pressure Hose C-Return Hose

D-Case Drain Hose to Tractor

E-Hose From CCS Fan Motor Case Drain

IMPORTANT: Damage to blower motor will occur if hoses are connected incorrectly. Check hydraulic connections before operating vacuum motor. See CHECKING HYDRAULIC CONNECTIONS in Preparing Vacuum Meter section. IMPORTANT: To prevent damage to vacuum motor, do not return SCV lever to neutral to shut off vacuum. NOTE: For non John Deere tractors, see dealer for vacuum motor hook-up. 1. Mount planter flow control valve assembly (A) on cab.

IMPORTANT: Ensure case drain hose is already connected to low pressure drain coupler. NOTE: Case drain line is shared between fan motor and vacuum motor. 2. Insert pressure hose (B) coming from planter flow control valve assembly (A) into right-hand SCV coupler. NOTE: Return hose must be equipped with a return coupler with cap. 3. Insert return hose (C) into left-hand SCV.

VACUMETER is a trademark of Deere & Company

OUO1074,000139A -19-11SEP01-1/1