Install Radar Signal Adapter Harness—8000 and 8000T Series Tractor

NOTE: This harness is used when existing tractor radar will supply signal to monitor and to tractor instrumentation. If tractor is not equipped with radar and a planter radar will be installed, go to “Install Radar”.

8000 Series Tractor installation illustrated.

1. 
   A40635-UN-26DEC96

   A - 2-Pin Harness

   Remove fuse panel cover and locate 2-pin harness (A).

---




2. 
   A40636-UN-26DEC96

   A - Signal Harness

   Route signal harness (A) behind console and into fuse panel area.

---




3. 
   A40637-UN-26DEC96

   Connect signal harness to tractor harness. Push connector back to side of fuses.

---




4. Install fuse panel cover.

5. Route signal harness under floor mat along window.

6. 
   A40638-UN-26DEC96

   A - Monitor Radar Harness

   Connect signal harness to monitor radar harness (A).

---