30-60 Series Row Crop Tractors (with Cab)—Console Installation

NOTE: For open station tractors see 30—60 Series Open Station Tractors Console Installation, this group.

  1. A35578
    A35578-UN-08APR93

    A - Brackets

    B - Cap Screws

    C - Rubber Washer

    Assemble monitor brackets (A) together and attach to window ledge with cap screws (B).


  2. Place rubber washer (C) over hole.

  3. Attach monitor to bracket.

  4. Install monitor harness and radar harness into grommet.

  5. A35590
    A35590-UN-12APR93

    A - Grommets

    B - Rear Plate

    C - Screws

    Install grommets (A) into rear plate (B) as illustrated.


  6. Attach plate to cab with six 5/16 x 7/8 in. screws (C).

  7. NOTE: If tractor is equipped with a 2-pin convenience outlet, order AA37254 to convert 2-pin to a 3-pin outlet.

    If tractor is not equipped with a convenience outlet, order AA37247.

    A35595
    A35595-UN-12APR93

    A - Monitor Power Connector

    B - Convenience Outlet

    Carefully push monitor power connector (A) into convenience outlet (B) and turn collar clockwise.


  8. A35591
    A35591-UN-12APR93

    A - Cap Screws

    B - Mounting Plate

    Remove four cap screws (A), two nuts and SAVE for reuse.


  9. Remove connector mounting plate (B) and DISCARD.

  10. A35592
    A35592-UN-19APR93

    A - Harness Connector

    B - Bracket

    C - Cap Screws

    D - Cap Screws

    Install harness connector (A) through slot in bracket (B).


  11. Mount bracket (B) (legs to front) to tractor SCV with two cap screws (C) previously removed.

  12. Install two cap screws (D) and nuts previously removed through connector (A) to bracket (B).

  13. A35593
    A35593-UN-12APR93

    A - Socket

    B - Connector Bracket

    Install socket (A) to connector bracket (B) with two M8 x 16 cap screws and M8 nuts.


  14. H45416
    H45416-UN-02DEC92

    A - Harness Connector

    B - Mounting Spade

    C - Self-tapping Screws

    Attach monitor harness connector (A) to mounting spade (B) using four self-tapping screws (C) provided with monitor.


  15. A35594
    A35594-UN-12APR93

    Insert monitor spade into socket.

AG,OUO1074,853-19-20000301