1895 Separate Fertilizer Placement No-Till Air Drill Specifications1

Type 3-Section drawn flexible frame with floating hitch and hydraulic over-center fold.
Dimensions
Overall length (hitch pin to rear of rear tires) 16-ft. 9-in. (5.1 m)
Lateral frame clearance, opener to opener - fertilizer openers 20-in. (50.8 mm) for fertilizer openers on front rank
Lateral frame clearance, opener to opener - seed openers 20-in.(50.8 mm) for seed openers on middle and rear ranks
Fore-aft frame clearance between ranks - seed openers 52.8-in. (134 mm)
Row Spacing 254 mm (10 in.)
Openers Per Machine and Opener Spacing:
Machine Size No. of fertilizer openers: No. of seed openers:
9.1 m (30 ft) 18 x 50.8 mm 20 in. spacing 36 x 254 mm (10 in.) spacing
11.2 m (36 ft) 22 x 50.8 mm 20 in. spacing 44 x 254 mm (10 in.) spacing
12.2 m (40 ft) 24 x 50.8 mm 20 in. spacing 48 x 254 mm (10 in.) spacing
13.1 m (43 ft) 25 x 50.8 mm 20 in. spacing 50 x 254 mm (10 in.) spacing
Down-Force per Opener
254 mm (10 in.) Spacing 75 kg to 204 kg (165 lb) to (450 lb)
Note: Maximum down-force requires addition of QUIK-TATCH™ weights to center frame and wings.
Ballast Weights at 45 kg (100 lb) Each
Center Frame 14 Rear
Wings 6 Each Side, 12 Total

NOTE: Ballast weights should not be used on wings when row markers are installed.

 

QUIK-TATCH is a trademark of Deere & Company

1Specifications and design subject to change without notice.

OUO6046,0001817 -19-26FEB02-1/1