|
Machine will not raise/lower evenly.
|
Wing lock-up valve is set to transport, without turnbuckle installed.
|
Move wing lock-up valve to "Plant" or install turnbuckle.
|
|
Frame raise/lower slowly.
|
Tractor SCV metering valve not open for enough.
|
Adjust SCV metering valve to MAX flow (2250 psi).
|
|
|
Low tractor hydraulic pressure.
|
Tractor standby pressure must be a minimum of 15 513 kpa (155.1 bar) (2250 psi).
|
|
Frame does not raise/lower level.
|
Wheel cylinder seal leaking.
|
Replace seal. See your John Deere Dealer.
|
|
|
Check valve leaking in wing lock-up valve.
|
Repair check valve.
|
|
|
Wing lock-up valve is set to transport, without turnbuckle installed.
|
Move wing lock-up valve to "Plant" or install turnbuckle.
|
|
|
Air in hydraulic system.
|
Hold SCV lever rearward to rephase and purge air from system.
|
|
Machine will not lower.
|
Pressure and return hoses not fully engaged in tractor SCV outlets.
|
Be sure to fully engaged hoses into tractor SCV couplers.
|