Changing Planting Rate Sprocket Combinations-Seed Transmission

1. Consult appropriate planting rate chart to determine desired sprocket combinations.

2. Remove retaining hook (A) from storage position.


A-Hook

A35746

OUO1011,0005010 -19-16FEB04-1/2

3. Pull chain tightener (A) downward and fasten hook (B) on tightener.

4. Remove required number of rubber sprocket spacers (C).

5. Remove chain from sprockets. Slide desired driver and driven sprockets (D) and (E) into alignment with chain tightener and replace chain.

6. Remove hook from chain tightener. Reposition hook in storage position by pressing it into clip.

7. Replace rubber sprocket spacers on upper and lower shafts.


A-Chain Tightener
B-Retaining Hook
C-Rubber Sprocket Spacers
D-Driver Sprockets
E-Driven Sprockets

A39334

OUO1011,0005010 -19-16FEB04-2/2