Check Hydraulic Control Functions

causym CAUTION: Be sure machine area is clear of bystanders and stationary obstacles before checking control functions.

Bystanders can be struck by moving machine parts and severely injured or killed.

Machine contact with stationary obstacles may cause damage.

Refer to your tractor and tillage equipment operator's manuals for specific instructions and check that:

1. Frame Lift Operations-Frame or openers raise and lower and press wheels extend and retract in response to SCV I control lever.

2. Wing Fold Operations-Transport wheels raise and lower and wings unfold and fold in response to SCV II control lever.

causym CAUTION: Keep all persons away from machine when checking fan operation. Seed or fertilizer blowing out at high speed can strike someone, causing blindness and other personal injuries.

IMPORTANT: DO NOT start fan unless you are sure case drain line is properly connected to low-pressure drain port. Fan motor damage occurs very quickly if hose is not properly connected.

3. Fan Operations-Fan turns in response to SCV III control lever.

HX,1820OMZ,A22A -19-04MAR05-1/1