|
Openers do not penetrate.
|
Frame set too high.
|
Lower depth with depth adjustment plates.
|
|
|
Frame not leveled.
|
Adjust wings to same level as center section.
|
|
|
Openers are badly worn.
|
Replace
|
|
Openers running too deep.
|
Frame set too low.
|
Raise frame.
|
|
|
Frame not leveled.
|
Adjust wings to same level as center section.
|
|
|
Too much opener down pressure.
|
Adjust for softer soil.
|
|
Uneven opener penetration.
|
Frame not leveled.
|
Adjust wings to same level as center section.
|
|
|
Inconsistent opener adjustments.
|
Adjust openers alike.
|
|
|
Incorrect press wheel yoke is installed in the incorrect location causing the press wheels not to line up with the openers or the seeding depth to be inconsistent.
|
Install correct press wheel yoke in correct location.
|
|
Insufficient penetration in wheel tracks.
|
Openers not set up for wheel tracks.
|
Add clips on spring-reset standards. Adjust spring-cushion standards for more down-pressure.
|
|
|
Insufficient opener down pressure.
|
Adjust for harder soil.
|
|
|
Opener tools worn.
|
Replace.
|
|
Mud builds up on openers.
|
Field too wet.
|
Let field dry out.
|