Installing Frame QUIK-TATCH™ Weights On Wings

causym CAUTION: Each QUIK-TATCH ™ weight weighs 45.4 kg (100 lb). Use proper lifting equipment to avoid personal injury when installing.

IMPORTANT: Additional weight may be needed when working in hard soil conditions without row markers.

NOTE: Wing weights are not to be used with markers.

QUIK-TATCH ™ weights are attached to wing ends to increase down-pressure. Each wing can hold up to six weights.

QUIK-TATCH is a trademark of Deere & Company.

OUO6023,000168F -19-18MAR03-1/2

1. Place two center weights (A) on frame, one on each side of welded pin.

2. Install equal number of weights on both sides of center weights and attach with tie bolt hardware (B).

Wing Section Hardware
Description (Part No.) Qty. Required
Lock Nut (K40015) 4
5/8 x 8-1/2 in. Gr. 8 Cap Screw (08H4248) 4
Washer (24M7241) 8

 

See your John Deere dealer to order QUIK-TATCH ™ weights and attaching hardware.

A37835

Wing Frame


A-Center Weights
B-Hardware

QUIK-TATCH is a trademark of Deere & Company.

OUO6023,000168F -19-18MAR03-2/2