Inspecting Machine

1. Inspect for loose, damaged or missing parts. Repair or replace parts before entering the field. Make sure air and hydraulic hoses and electrical wires do not interfere with moving parts.

2. Check inside tanks and remove any obstructions from meter inlet openings before filling.

OUO6023,000174D -19-18MAR03-1/2

causym CAUTION: Stabilizer foot pin is under spring tension. Under no condition should pin be removed. For service, see your John Deere dealer.

3. Ensure cotter pins (A) are installed on both ends of pin for each stabilizer foot.


A-Cotter Pin

A52201

OUO6023,000174D -19-18MAR03-2/2