|
Before operating, make sure you have:
[ ] Correctly attached hydraulic hoses to tractor. Be sure fan motor case drain hose is connected to low pressure (under 172 kPa [1.72 bar] [25 psi]) return port and not crimped.
[ ] Removed obstructions from meter inlet openings inside the tank before filling.
[ ] Adjusted plenum pressure for desired application rate. Cleaned fan screen.
|
[ ] Inflated tires to proper pressure.
[ ] Thoroughly cleaned product residue from meter segment flutes.
[ ] Customized meter wheels to agree with product.
[ ] Verified that metering gates are properly set for product to be used.
[ ] Performed rate check and adjusted transmission output speed(s) accordingly.
|