Adjusting Gauge Wheels

NOTE: When assembled, gauge wheels and disk blades must be free to turn with minimal resistance.

To prevent a buildup of dirt or trash between gauge wheels and opener, position wheels correctly against disk blades.

Gauge-wheel tires should just touch blades or be no more than 1.5 mm (1/16 in.) away from blades at their closest point.

To move gauge wheel closer to blade, place wrench (A) on inside nut and turn counterclockwise. To move gauge wheel away from blade, turn wrench (A) clockwise.

A-Wrench

AG,OUO6074,1369 -19-16MAR04-1/1