Specifications

FRAME Front-Folding
AIR SYSTEM Hydraulic drive
Horsepower Required: 4.5-10.4 kW (6-14 hp)
PLANTING UNIT TYPES Vacuum
SEED OPENERS TRU-VEE™ double disk
ROW SPACING 24-Row Narrow-76 cm (30 in.)
TYPE OF LIFT Wheel modules with rephasing hydraulic system
TYPE OF DRIVE Mechanical Transmission
SEEDSTAR™ Variable Rate Drive
TIRES Contact Drive Tire: 16 x 6.50-8 4 ply
Center Frame Wheels: 11.00-22.5 TL LR F
Wing Wheels: 10.00-15 8 ply
Wing Wheels (Optional): 11.00-22.5 TL LR F
SEED HOPPERS Mini Hoppers
SEED TANKS Two 1762 L (50 bu) bulk tanks
MARKERS Automatic alternating
Independent controlled
MINIMUM TRACTOR SIZE REQUIRED 130-186 kW (175-250 PTO hp.) (Depending on planter configuration)
HYDRAULIC OIL REQUIRED TO OPERATE PLANTER 12.5 L (3.3 U.S. gal)
TRACTOR STANDBY PRESSURE 17 237 kPa (2500 psi)
HYDRAULIC SYSTEM WORKING PRESSURE 20 684 kPa (3000 PSI)
HYDRAULIC SYSTEM BURST PRESSURE 82 737 kPa (12 000 PSI)
SEED MONITOR COMPUTER TRAK™ 350
SEEDSTAR™

 

NOTE: Certain row unit attachments may increase transport width.

Machine Position Height Width Length (two-point) Length (drawbar)
Unfolded 3.2 m (10 ft 6 in.) 18.7 m (61 ft 3 in.) 8.6 m (28 ft 3 in.) 9.7 m (31 ft 8 in.)
Folded 4.2 m (13 ft 8 in.) 3.7 m (12 ft) 13.1 m (42 ft 9 in.) 13.7 m (44 ft 9 in.)

 

TRU-VEE is a trademark of Deere & Company
SEEDSTAR is a trademark of Deere & Company
COMPUTER TRAK is a trademark of Deere & Company

OM62304,170A -19-03AUG05-1/1