Liquid Fertilizer Sensor Calibration (Optional)

1. Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

2. Select Fertilizer from drop down box.

3. Select each sensor, one at a time, from the Sensor drop down box.

4. Select Cal Value input box and enter the pressure per volt from the fertilizer sensor. John Deere ™ planters with factory equipped sensors have a calibration value of 37.50.

NOTE: Some pressure remains trapped in the system even after it is shut down, unless manually relieved.

NOTE: Current pressure is displayed on bottom left of screen.

5. Relieve fertilizer pressure from system and select the Zero Sensor button.

Screen Area Information

Planter Configuration Planter Configuration Sensor Sensor Fertilizer Fertilizer High Pressure High Pressure Cal Value Calibration Value Pressure Pressure Relieve Pressure Relieve Pressure Select Select
A59551

Planter Button

A59172

Configuration Softkey

A59369

Zero Sensor Button

John Deere is a trademark of Deere & Company

OUO6074,0000F87 -19-30OCT07-1/1