Ground Speed Source

1. Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

2. Select Tractor Speed from drop down box.

3. Auto box checked is the recommended option. Radar speed and tractor wheel speed are shown on bottom of screen. The active source used at this moment is displayed in the middle of the screen.

4. To force the monitor to use only one speed source, clear Auto check box.

5. Select a single speed source; Radar or Wheel Speed .

Screen Area Information

Planter Configuration Planter Configuration Sensors: Sensors: Sensor Sensor Tractor Speed Tractor Speed Auto Auto Select Source Select Source Active Source Active Source mph Miles Per Hour kph Kilometers Per Hour
A59551

Planter Button

A59172

Configuration Softkey

A61377

Radar Speed

A61378

Wheel Speed

OUO6074,000107C -19-18NOV07-1/1