|
The following information can be found in your Rate Charts and Settings Operator's Manual:
-
Seed meter setup information for vacuum and plateless meters
-
Graphite and talc lubrication information
-
Vacuum seed disk recommendations
-
Vacuum setting information
-
Seed rate charts for vacuum and plateless meters
-
Seed transmission setting information
Once machine is set for a specific crop and is performing as desired, enter machine settings in the following table as shown. That information can then be used later, when changing from one crop to another, or from one year to the next. An identical table is provided in your Rate Charts and Settings Operator's Manual.
|