Width, Height and Weight-1890 No-Till Drill

NOTE: Weights are with typical optional equipment. Weights with other optional equipment will vary.

The maximum static vertical load for this implement is achieved with the implement folded in road transport position and equipped with authorized attachments.

Specification

Maximum Static Vertical Load on Tractor Drawbar -Weight 227 kg (500 lbs.)

Working Width Transporting Weight
19 cm (7.5 in.) and 38 cm (15 in.) Spacing 25.4 cm (10 in.) Spacing Width Height 19 cm (7.5 in.) and 38 cm (15 in.) Spacing 25.4 cm (10 in.) Spacing
9.1 m (30 ft.) 9.1 m (30 ft.) 4.4 m (14 ft. 4 in.) 3.7 m (11 ft. 11 in.) 7700 kg (17 000 lb.)a 7000 kg (15 000 lb.)a
11.0 m (36 ft. 3 in.) 11.2 m (36 ft. 8 in.) 4.4 m (14 ft. 4 in.) 4.5 m (14 ft. 11 in.) 9300 kg (21 000 lb.)a 8000 kg (18 000 lb.)a
12.2 m (40 ft.) 12.2 m (40 ft.) 5.6 m (18 ft. 4 in.) 4.4 m (14 ft. 7 in.) 10 000 kg (22 000 lb.)a 9000 kg (20 000 lb.)a
12.9 m (42 ft. 6 in.) 12.7 m (41 ft. 8 in.) 5.6 m (18 ft. 4 in.) 4.8 m (15 ft. 10 in.) 11,000 kg (24 000 lb.)a 9000 kg (20 000 lb.)a
Specifications and design subject to change without notice.
aWeights of 1890 No-Till Air Drill are approximate.

 

NOTE: Refer to 1910 Commodity Cart Operator's Manual for recommendations and specifications for machine combinations.

OUO6089,00003F7 -19-04AUG08-1/1