Tramline SetupTramlines are placed for equipment such as field sprayers or fertilizer spreaders. The details of the equipment working width are vital for a correct calculation. An "X" appears next to tramline equipment width when a value is not compatible with drill width. 1. Select Menu button >> select Drill Application button >> select Function Toggle icon to page 2 of function menu >> select Tramline Setup icon.2. Select input box (A) and enter tramline equipment width. A checkmark (B) indicates a valid tramline width compatible with drill width. An "X" indicates an invalid tramline width. 3. Select side of field where tramline begins, using drop down box (C). Select left side of field or right side of field. 4. Select tramline symmetry from drop down box (D). Select asymmetrical or symmetrical. Asymmetrical -One tramline is set in one pass. Symmetrical -Both tramlines are set in one pass.
|
|
NS43404,0000098 -19-17OCT08-1/1 |