Track Sensor Setup

Set Track Sensor Source

1. Select Menu button >> select Drill Application icon >> select Function Toggle until icon set 2 is displayed >> select Setup icon >> select Next Page icon.

NOTE: Only drill drive wheel and tractor radar require calibration. Other sensor sources are determined automatically.

2. Select drop down menu (A) and set source of track sensor.

A63046

Setup Icon

A63026

Next Page

A63065

Sensor Type


A-Drop Down Menu

NS43404,0000099 -19-17OCT08-1/2

Calibrate Track Sensor

1. Select Menu button >> select Drill Application icon >> select Function Toggle until icon set 2 is displayed >> select Setup icon.

2. Select start (A) and drive tractor 100 m (328 ft.).

3. When complete, stop tractor and select stop (A). Drive wheel pulses are displayed in input box (B).

4. Select input box (B) to manually enter drive wheel pulses.

A63064
A63046

Setup Icon


A-Start and Stop
B-Input Box

NS43404,0000099 -19-17OCT08-2/2