A-Obstruction
B-LED
C-Increase Tramline
D-Menu
E-Screen
F-Alarm

G-LED
H-Clear
I-Increase
J-LED
K-Tramline
L-LED

M-Rate of Work
N-Calibration and Test
O-Meter Shutoff
P-LED
Q-Drive Speed

R-Meter Shutoff (Right)
S-LED
T-Fan Speed
U-Confirm
V-Decrease

(A) Obstruction - Temporarily raises marker to avoid damage by obstacles. LED (B) indicates active obstruction sequence.

(C) Increase Tramline - Increases tramline sequence by 1 (if enabled).

(D) Menu - Cycles through selectable, on-screen, items.

(E) Screen - Displays machine status, settings, and other information.

(F) Alarm - Displays active alarms on screen. LED (G) indicates an active alarm.

(H ) Clear - Cancels input.

(I) Increase - Increases value. Toggles functions. Increases seed rate during operation. LED (L) indicates adjustment to seed rate.

(K) Tramline - Shows current pass in tramlining rhythm. LED (L) indicates selection.

(M) Rate of Work - Displays area covered (in hectacres).

(N) Calibration and Test - Displays calibrations and machine tests.

NS43404,00000A6 -19-17OCT08-1/2

(O) Meter Shutoff - Shuts off seed meter. If 2 tanks are present, shuts off left-hand meter. Indicated by LED (P).

(Q) Drive Speed - Displays drive speed of tractor.

(R) Meter Shutoff (Right) - Shuts off right-hand seed meter. Indicated by LED (S). If only one meter is present, button is not used.

(T) Fan Speed - Displays current fan speed.

(U) Confirm - Confirms entries.

(V) Decrease - Decreases value. Toggles functions. Increases seed rate during operation. LED (L) indicates adjustment to seed rate.

NS43404,00000A6 -19-17OCT08-2/2