Tramline Setup

Tramlines are placed for equipment such as field sprayers or fertilizer spreaders. The details of the equipment working width are vital for a correct calculation. An error is displayed if a value is entered that is not compatible with machine width.

1. Select Menu button until tramline setup icon appears on screen. Select Confirm button.

A63096

Menu Button

A63109

Tramline Setup Icon

A63107

Confirm Button

NS43404,00000AD -19-16OCT08-1/5

2. Enable Tramlines:

a. Select Menu until tramline activity screen appears. Select Confirm button.

b. A "V" is present in the box when enabled. Select Increase or Decrease buttons to enable or disable tramline.

c. Select Confirm button.

A63112

Tramline Activity Screen

NS43404,00000AD -19-16OCT08-2/5

3. Set Operating Width:

a. Select Menu button until operating width screen appears. Select Confirm button.

b. Select Increase or Decrease buttons to adjust operating width. Value shown as meters.

c. Select Confirm button.

A63113

Operating Width Icon and Value Screen

NS43404,00000AD -19-16OCT08-3/5

4. Field Orientation:

a. Select Menu until orientation screen appears. Select Confirm button.

b. Select Increase or Decrease buttons to change field orientation. Field orientation sets the side of the field tramline pattern begins.

c. Select Confirm button.

A63116

Field Orientation Screen - Left Side Shown

A63055

Left Side of Field

A63056

Right Side of Field

NS43404,00000AD -19-16OCT08-4/5

5. Tramline Symmetry:

a. Select Menu until tramline symmetry screen appears. Select Confirm button.

b. Select Increase or Decrease buttons to select symmetrical or asymmetrical pattern.

Symmetrical- Both tramlines are set in one pass.

Asymmetrical- One tramline is set in one pass.

c. Select Confirm button.

A63114

Symmetry Screen - Symmetrical Tramline Shown

A63054

Asymmetrical

A63053

Symmetrical

NS43404,00000AD -19-16OCT08-5/5