The drill must now be converted from the transport mode to operating mode.

If not already done, attach drill to tractor. See Attaching and Detaching section.

Unfold wings. See Operating the Machine section.

Extend the track markers and secure them in position. See Operating the Machine section.

CAUTION: Never stand underneath a raised track marker.

Fill seed hopper with seed.

IMPORTANT: Do not use any part of the drill as a step or foothold. Beware of obstacles.

NOTE: Make sure that there are no foreign bodies or other types of seed in the seed hopper. Check that the hopper trapdoor is closed and that there is no water in the manifold.

With some types of seed (grass, rape), it is advisable to fill the seed hopper only up to the underside of the removable sieve to ensures smoother flow of seed.

Couple the drill to the hydraulic system. See Attaching and Detaching Section.

Couple up the electronic Signus/GreenStar ™ system. See Signus Seed Drill Monitor System section or GreenStar™ Seed Drill Monitor System section.

GreenStar is a trademark of Deere & Company

NS43404,00000CA -19-03NOV08-1/1