| Instruction |
Additional information |
Performed by |
After the first few hours |
| Check and tighten all screws |
|
Customer |
Before use (every time) |
| Check chain tension |
|
Customer/dealer |
| Check cleaning brush in metering device |
When micrometering or sowing fine seed |
Customer |
Once a year (at start of season) |
| Check drive chain tension |
Retighten if necessary |
Customer/dealer |
| Check chain housing |
|
Customer |
| Check hose joints |
On fan, distributor and to |
Customer |
| Change seal lip on metering device |
Only if worn |
Customer/dealer |
| Check cleaning brush on metering device |
When micrometering; replace if necessary |
Customer |
| Check seal lip and cleaning brush |
On metering device; replace if necessary |
Customer |
| Lubricate the chain on the metering device drive |
|
Customer |
| Apply grease to drive shafts |
|
Customer |
Once a year (at end of season) |
| Store electrical components at room temperature |
Monitor and Switch Box |
Customer |
After 500 to 800 hectares |
| Check the drill |
|
Dealer |
After 3 to 5 years |
| Replace hydraulic hoses |
|
Customer/dealer |
As required |
| Tighten screws and nuts |
|
Customer |