For All Tractors

IMPORTANT: Drills are manufactured to be used with tractors equipped with closed-center hydraulic systems.

Special bundles are available as attachments to convert machine for use on a tractor with open-center hydraulic system or to easily switch between each hydraulic system. See Attachments section.

Hose unions must comply with ISO standards.

Specification

Hose Union -Dimension (A) 23.7 mm ±0.04 mm (0.933 in. ±0.002 in.)
Hose Union -Dimension (B) Minimum 24 mm (0.945 in.)

Refer to your tractor operator's manual for recommended tire inflation, use of hydraulic system and other information on tractor implement usage.

Check tire pressure and install ballast, if required. See your tractor operator's manual.

Check tractor hydraulic oil reservoir and add oil, if needed.

LX006613


A-Dimension
B-Dimension

ZX,OM740A008459 -19-07SEP05-1/1