Vacuum Sensors

NOTE: This option is only visible if machine is configured for one or more sensors.

1. Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

2. Select Vacuum from drop down box.

3. Select number of vacuum sensors on machine from Sensors: drop down box.

NOTE: Current pressure is displayed on bottom left of screen.

4. Select each sensor, one at a time, from the Sensor drop down box. Shut off vacuum hydraulics and select the Zero Sensor button.

Screen Area Information

Planter Configuration Planter Configuration Sensors: Sensors: Sensor Sensor Vacuum Vacuum Cal Value Calibration Value Turn Vacuum Off Turn Vacuum Off Select Select
A59551

Planter Button

A59172

Configuration Softkey

A59369

Zero Sensor Button

OUO6074,0000F83 -19-23JUL08-1/1