Seed Sensors On/Off

1. Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

IMPORTANT: Frame configuration must be complete before seed sensor setup.

2. Select Seed from drop down box.

3. To change all rows at once, select button to Turn All Rows On or to Turn All Rows Off .

To change one row at a time, select Row input box and enter row number. Select On or Off check box to configure selected row.

On/Off selections are only available for active rows. Example: If a split row machine is set to plant in the wide row configuration, the intermediate (split) rows are not selectable.

Screen Area Information

Planter Configuration Planter Configuration Seed Seed Row Row On On Off Off All Rows On All Rows On All Rows Off All Rows Off Turn All Rows On Turn All Rows On Turn All Rows Off Turn All Rows Off Rows Off: Rows Off:
A59551

Planter Button

A59172

Configuration Softkey

OUO6074,0000F84 -19-12MAR07-1/1