Liquid Fertilizer Sensors

NOTE: This option is only visible if machine is configured for one or more sensors.

1. Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

2. Select Fertilizer from drop down box.

3. Select number of fertilizer sensors on machine from Sensors: drop down box.

4. Select each sensor, one at a time, from the Sensor drop down box. Select High Pressure input box and enter a high pressure warning limit, if desired.

NOTE: Current pressure is displayed on bottom left of screen.

5. Select each sensor, one at a time, from the Sensor drop down box. Relieve pressure in fertilizer system and select the Zero Sensor button.

Screen Area Information

Planter Configuration Planter Configuration Fertilizer Fertilizer Sensors: Sensors: Sensor Sensor High Pressure High Pressure Cal Value Calibration Value Pressure Pressure Relieve Pressure Relieve Pressure Select Select
A59551

Planter Button

A59172

Configuration Softkey

A59369

Zero Sensor Button

OUO6074,0000FA8 -19-23JUL08-1/1