VRD Motor/Valve Flush
Use this to flush air from VRD hydraulic system.
1.
Select
Menu
>>
Planter
button >>
Diagnostics
softkey >>
Tests
tab.
2.
Select
VRD Motor/Valve Flush
from drop down box.
3.
Select
Flush Time
input box and enter a value of 1, 2, or 3 seconds.
4.
Plant at a speed greater than 4 km/h (2 mph).
Motors operate for duration indicated and flush air from system.
Screen Area Information
Planter Diagnostics
Planter Diagnostics
Tests
Tests
VRD Motor/Valve Flush
Variable Rate Drive Motor/Valve Flush
Ground Speed
Ground Speed
mph
Miles per hour
kph
Kilometers per hour
Flush Time
Flush Time
secs
Seconds
Flush RPM
Flush revolutions per minute
Motor
Motor
Quick Start
Quick Start
Auto
Auto
Manual
Manual
Speed must be greater than 4 kmh (2 mph)
Speed must be greater than 4 km/h (2 mph)
speed needs to be increased
speed needs to be increased
Value out of range
Value out of range
|
