Follow Safe Operating Procedures
 CAUTION:
Help prevent severe injury or death to you or someone else.
Follow safe operating procedures.
-
Follow all recommended operating procedures.
-
Do not make field adjustments while machine is in motion.
-
Operate machine from the tractor seat only.
-
Do not enter tank unless another person is present and hydraulic hoses are disconnected from tractor.
-
Keep hands and fingers away from hinge area when positioning auger. Lock auger in storage position before moving machine.
-
Never raise or lower wings when moving.
-
Stop on level ground when raising or lowering wings.
-
Do not operate in the field with the seeding tool wings raised. Fold wings to transport position just before leaving the field and entering a roadway.
-
Clear area around machine before raising or lowering machine or wings.
-
Always locate machine on level ground when raising and lowering wings.
-
Do not operate close to the edge of a steep embankment.
-
Avoid holes, ditches, and obstructions especially on hillsides.
-
Avoid sharp turns on hillsides.
-
Slow down when turning or traveling over rough ground.
-
Shut off tractor, shift transmission to Park, and set brakes when leaving tractor. Remove key when tractor is unattended.
|
|
