|
IMPORTANT:
Data shown on the rate charts was established with fine tuning rings installed on meter rollers (per seeding tool configuration). Fine tuning rings must be installed to use these charts.
IMPORTANT:
If product does not appear in the rate charts or on the monitor, contact your John Deere Dealer for product use recommendations.
IMPORTANT:
Do not use granular herbicide or pesticide with air cart.
NOTE:
Meters deliver volume of seed not specific population. Delivery rates vary up to 10 percent from rate chart values due to; seed characteristics, drive wheel circumference, operator judgment, and machine settings. Always perform calibration and verification checks to determine exact application.
|
NOTE:
(See ADJUST RATE BASED ON SEED GERMINATION in this section for additional information.)
Use rate charts to determine a transmission setting based on the type of product in the tank and the type (color) of meter roller in meter cartridge.
EXAMPLE:
The desired application rate of Alfalfa is 27.5 kg/hectare (25 lbs/acre). The low rate (yellow) meter roller is installed for this application.
Use the low rate (yellow) meter rate chart. Locate the desired application weight in the Alfalfa column and follow that row to the left (Transmission Setting) column. The transmission setting is 62.
|