Configure 2510S Strip Till Applicator

A62045

Blockage Button
A62047

Blockage Configuration

1. Select primary Menu button >> Blockage button >> Blockage Configuration softkey.

2. Select and check the Yes check box next to 2510S.

3. Select Air Drill Size from drop-down box.

4. Select Blockage Configuration button on lower area of screen.

5. Select the boxes next to each row number and turn sensors on or off. An empty box indicates an active sensor. A box with an X indicates an inactive sensor.

Select Enter button when complete.

Screen Area Information

Blockage Setup Blockage Setup 2510S Strip Till Applicator 2510S Strip Till Applicator Yes Yes No No Air Drill Size Air Drill Size m Meter ft Feet Rows Rows

OUO6074,0000004 -19-24MAR08-1/1