Distance Failed Message

A49606
A49606-UN-26JUL02

If the radar signal is lost due to a poor connection, pinched harness or failed radar sensor, population, area and ground speed cannot be computed or displayed. DIST and FAILED alternately flashes in right-hand column and alarm sounds briefly.

The sensor problem must be fixed as soon as possible. If planting must continue, the monitor can still monitor seed flow. A fixed speed must be entered into distance calibration page to continue monitoring without radar input. See SPEED SET MODE in ComputerTrak™ 350 Monitor Setup section.

OUO6045,00000C7-19-20090203